BOSCH German electronic control common rail diesel engine training platform
Engine assembly and control unit, the original vehicle wiring harness, instrument cluster, various
sensors and actuators, the diesel tank and diesel pump assembly, batteries, digital voltmeter,
vacuum gauge, fuel gauge, ignition switch, heat sink, color panel of the circuit schematic, external
testing terminal, intelligent fault set system, safety devices, mobile stand, manual, etc..
● main parameters:
Engine Type: four - stroke inline four-cylinder electronically controlled common rail injection diesel
engine
Displacement: 2.8TC
Operating voltage: 12V DC
Working environment: - 40 ℃ ~ 50 ℃
Size:1500*1000*1500mm
Weight:120Kg
● Main function
1.Dynamic operating features: The original German BOSCH CRS2.0 electronic control common rail
injection diesel engine assembly as basis , with the auxiliary control system, sensors and actuators,
make sure the normal operation of the engine, dynamic presentations of their work process.
2.Display functions: Through the original car wiring harness to connect the combination meter, can
real - time display engine operation during the various state dynamic, static signal parameters.
3.Detection: Training platform panels are installed on the external detection terminals, can be directly
on the panel detection sensor, actuator, the engine control unit pin electrical signals, such as
resistance, voltage, frequency, waveform signals.
4.Signal simulation capabilities: Can do the engine electronic control system sensor signal simulation,
and real -time detection engine running state changes caused by changes in the sensor input signal.
5.Self -diagnostic function: Equipped with computer data detection port, dedicated or universal
decoding apparatus can be connected to the engine electronic control system ECU coding queries,
read trouble code, clear trouble code, read data stream, waveform analysis, the implementation of
component testing from diagnostic capabilities.
6.Fault setting functions: Equipped with intelligent fault setting and assessment system, with a test
database compatible with the device, test database can be edited according to user needs, be able to
set and control module of the common failure of the foot. Installed on RJ45 network interface,
equipped with RS- 232 serial port, the available cable and other equipment failure set the device to
form a network, set by the host computer to control each piece of equipment failures,
troubleshooting, parameter setting, remote start, feedback, assessment score
