• 10 MHz to 43.5 GHz
• 2- or 4-ports with two built-in sources
• 126 dB system and 129 receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth
• High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)
• Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
• Low noise floor of -111 dBm at 10 Hz IF bandwidth

World´s widest range of single-connection measurement applications
The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.

Replace racks and stacks
Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.

 Applications:

• S-parameters (CW and pulsed)
• Noise figure
• Gain compression
• Intermodulation and harmonic distortion
• Conversion gain/loss
• True-differential stimulus
• Millimeter-wave
• Nonlinear waveform and X-parameter® characterization
• Antenna test

Choose your application: PNA-L, PNA, and PNA-X Options

PNA Firmware, Upgrade and Support

"X-parameters" is a registered trademark of Agilent Technologies. The X-parameter format and underlying equations are open and documented. For more information X-Parameters Open Documentation, Trademark Usage & Partnerships